AVR Studio 4

This is a community forum and not official technical support. — If you need official support: Contact Us

The following comments are owned by whoever posted them. We are not responsible for them in any way.


Reply to Thread Back to Threads

Runs at Crossover 10
Björn Kalkbrenner
Björn Kalkbrenner Dragon Turbo Chief Senior Advocate
Posted 2011-06-02 08:04

Create a new bottle
Download and install
AVR Studio 4.18 (build 684) (116 MB, updated 11/09) MD5:f2b0fa6dbdf6e858806e58fdf6ae6b82
http://www.atmel.com/dyn/resources/prod_documents/AvrStudio4Setup.exe
and press OK if you see an error.

Download and install
http://www.atmel.com/dyn/resources/prod_documents/AVRStudio4.18SP3.exe
AVR Studio 4.18 Service Pack 3 (build 716, 31 MB, updated 09/10) MD5:F3B6543528D274FFC3CC07E5A611C3BD

If you have problems compiling due to missing WinAVR or AVR ToolChain,
Download and install
AVR Toolchain (87 MB, updated 09/10, AVR-GCC: 4.4.3, AVR-LIBC: 1.7.0) MD5:999B3DC3DF471B3A667CF0FE90A522E8.
http://www.atmel.com/dyn/resources/prod_documents/avr-toolchain-installer-3.0.0.240-win32.win32.x86.exe

- IDE works
- compilation works
- On some projects, the simulator works
- flashing with STK600 (and maybe also not AVR Dragon) does _not_ work due to a specific USB driver which is not installed/seen. You can use AVRDude native on linux for flashing and setting fuses. Maybe STK500 may work.


CrossOver Forums: the place to discuss running Windows applications on Mac and Linux

Please Wait...
eyJjYXJ0IjowLCJ0enMiOi01LCJjZG4iOiJodHRwczpcL1wvbWVkaWEuY29kZXdlYXZlcnMuY29tXC9wdWJcL2Nyb3Nzb3Zlclwvd2Vic2l0ZSIsImNkbnRzIjoxNTcwNTQ3NzcwfQ==