World of Warcraft

This is a community forum and not official technical support. — If you need official support: Contact Us

The following comments are owned by whoever posted them. We are not responsible for them in any way.


Reply to Thread Back to Threads

WoW was working, but now it's not.
Nathan Sweet
Posted 2006-12-04 14:39
I'm running Ubuntu 6.06 i386 on an AMD 64 with an Nvidia card and Nvidia driver.  I had installed WoW with the first 6.0 beta and it worked just fine (except for a slight audio delay, but that's nothing to complain about).  I then set up Beryl and XGL, however, come to find out, WoW doesn't work with Beryl/XGL.  So, I undid all the changes for Beryl/XGL, but WoW still won't work.  Running from the command line, I get the following (abbreviated) output:

wine: Unhandled page fault on read access to 0x0035b598 at address 0x7e72b3c9 (thread 0039), starting debugger...
WineDbg starting on pid 0x2f
Unhandled exception: page fault on read access to 0x0035b598 in 32-bit code (0x7e72b3c9).
Register dump:
 CS:0073 SS:007b DS:007b ES:007b FS:003b GS:0033
 EIP:7e72b3c9 ESP:0034d908 EBP:0034d910 EFLAGS:00010206(   - 00      - RIP1)
 EAX:0000db00 EBX:7e7d7bbc ECX:0034da98 EDX:0035b598
 ESI:0000db00 EDI:00000000
Stack dump:
0x0034d908:  7e7d7bbc 00181718 0034d940 7e72b44a
0x0034d918:  0034da98 7ec13d0e 000600f8 7e72b431
0x0034d928:  0034d930 00000000 0000000e 0034da98
0x0034d938:  00181718 00000000 0034d95c 7103601a
0x0034d948:  0034da98 00181718 00000001 00180ff8
0x0034d958:  00000000 0034d978 7108e5d5 00181708
fixme:ntdll:RtlNtStatusToDosErrorNoTeb no mapping for c0000119
Backtrace:
=>1 0x7e72b3c9 ILGetSize+0x39 in shell32 (0x7e72b3c9)
  2 0x7e72b44a ILClone+0x2a in shell32 (0x7e72b44a)
  3 0x7103601a in shdocvw (+0x3601a) (0x7103601a)
  4 0x7108e5d5 in shdocvw (+0x8e5d5) (0x7108e5d5)
  5 0x7108bb85 in shdocvw (+0x8bb85) (0x7108bb85)
  6 0x0042641d in launcher (+0x2641d) (0x0042641d)
  7 0x0042742b in launcher (+0x2742b) (0x0042742b)
  8 0x00422e30 in launcher (+0x22e30) (0x00422e30)
  9 0x004235c3 in launcher (+0x235c3) (0x004235c3)
  10 0x0042434a in launcher (+0x2434a) (0x0042434a)
  11 0x004244ff in launcher (+0x244ff) (0x004244ff)
  12 0x00423e4f in launcher (+0x23e4f) (0x00423e4f)
  13 0x0043e5c9 in launcher (+0x3e5c9) (0x0043e5c9)
  14 0x00439cd1 in launcher (+0x39cd1) (0x00439cd1)
  15 0x0043b517 in launcher (+0x3b517) (0x0043b517)
  16 0x0043b5a7 in launcher (+0x3b5a7) (0x0043b5a7)
  17 0x7ec1b23a WINPROC_wrapper+0x1a in user32 (0x7ec1b23a)
  18 0x7ec1b666 WINPROC_wrapper+0x446 in user32 (0x7ec1b666)
  19 0x7ec1da24 in user32 (+0x8da24) (0x7ec1da24)
  20 0x7ec20650 CallWindowProcW+0xa0 in user32 (0x7ec20650)
  21 0x7ebee84e in user32 (+0x5e84e) (0x7ebee84e)
  22 0x7ebeec83 SendMessageTimeoutW+0x163 in user32 (0x7ebeec83)
  23 0x7ebeecd7 SendMessageW+0x37 in user32 (0x7ebeecd7)
  24 0x7ebc23f2 in user32 (+0x323f2) (0x7ebc23f2)
  25 0x7ebc31be CreateDialogIndirectParamAorW+0x2e in user32 (0x7ebc31be)
  26 0x7ebc329e CreateDialogIndirectParamA+0x2e in user32 (0x7ebc329e)
  27 0x0043e909 in launcher (+0x3e909) (0x0043e909)
  28 0x0043ea77 in launcher (+0x3ea77) (0x0043ea77)
  29 0x00403783 in launcher (+0x3783) (0x00403783)
  30 0x7efbc67e LdrInitializeThunk+0x41e in ntdll (0x7efbc67e)
  31 0x7eec9013 in kernel32 (+0x49013) (0x7eec9013)
  32 0xb7ed55b7 wine_switch_to_stack+0x17 in libwine.so.1 (0xb7ed55b7)
0x7e72b3c9 ILGetSize+0x39 in shell32: movw      0x0(%edx),%ax


Any thoughts?
Dave
Dave Turbo Chief Senior Advocate
Posted 2006-12-04 22:42
I have Beryl (with nVidia Xgl driver support) installed and have no problems.  I am not using Beryl, but that may rule out the possibility of libraries being updated with the installation of Beryl.
Nathan Sweet
Posted 2006-12-09 14:50
I ended up re-installing Crossover and the game.  All is well so far, even with the 2.0.1 patch.

linuxjoe
linuxjoe Supreme Raging Atomic Dragon Turbo Chief Senior Advocate
Posted 2006-12-10 10:28
One thing i have found with the background downloader and updates with WOW lately
The background downloader will not start on exit no matter what the settings were.

but when the patch came out it downloaded sometimes you will get a error that it can not
write the patch or it will hang on trying to install the patch. To fix this just use the Terminate
windows applications and choose the bottle you used for WOW.

Then on the next start of WOW it will load and install the patches fine.
That could have been the problem when you installed Beryl.

CrossOver Forums: the place to discuss running Windows applications on Mac and Linux

Please Wait...
eyJjYXJ0IjowLCJ0enMiOi01LCJjZG4iOiJodHRwczpcL1wvbWVkaWEuY29kZXdlYXZlcnMuY29tXC9wdWJcL2Nyb3Nzb3Zlclwvd2Vic2l0ZSIsImNkbnRzIjoxNTU4MDM0NTA0fQ==