CrossOver Support - Community Forums

Important Information These are community forums and not official technical support. If you need official support: Contact Us

CrossOver Mac
Discussion about CrossOver Mac

The following comments are owned by whoever posted them. We are not responsible for them in any way.

Back to Threads Reply to Thread

MasterCAM X4

Hi.

I'm attempting to install MasterCAM X4 demo in Crossover Mac 8.03 on my MacBook Pro, OSX.6.2

The install doesn't take. I could quote the Console report here, but I don't speak gibberish. :)

I was discussing this with a Linux user, who suggested that MasterCAM might require the .NET framework.

Okay, um... I see some of the Gamers are using it already.

How difficult is it to install .NET in a bottle? (And then of course install X4 in the same bottle, not the recommended procedure.)

Will Crossover Mac 9 include .NET by default?

Hi,
,NET is already an install target in 8.0.3 under 'install service packs
and dependencies'...

See; http://www.codeweavers.com/support/docs/crossover-mac/mac-preferences-installer

Make sure you uncheck 'hide service pack and deps'...

Cheers!

Okay, I tried unchecking "hide service pack" and ran the install again.

It still didn't take.

I was expecting to see something different, but it all went nearly the same.

2/26/10 5:54:59 PM CrossOver[17182] Setting DYLD_FALLBACK_LIBRARY_PATH=/Applications/CrossOver.app/Contents/SharedSupport/X11/lib:/Users/Jkirk279/lib:/lib:/usr/lib:/usr/X11/lib
2/26/10 5:54:59 PM CrossOver[17182]
8.0.3
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Release Date: 18 December 2003
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] X Protocol Version 11, Revision 0, Release 6.8.2
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Build Operating System: Mac OS X Apple Computer, Inc.
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Current Operating System: Darwin William-Carrs-MacBook-Pro-3.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Before reporting problems, check http://www.codeweavers.com/support/
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] to make sure that you have the latest version.
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] XSERVTransmkdir: Owner of /tmp/.CrossOver should be set to root
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Loading GLX bundle glxCGL.bundle (using Apple's OpenGL)
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Display mode: Rootless Quartz -- Xplugin implementation
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] PseudoramiX screen 0 added: 1024x618 @ (0,22).
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] PseudoramiX screen 0 placed at X11 coordinate (0,0).
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] [DRI] screen 0 installation complete
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Screen 0 added: 1024x618 @ (0,22)
2/26/10 5:54:59 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] Screen 0 placed at X11 coordinate (0,0).
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] dyld: warning,
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] DYLD
setting caused circular de
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] pendency in /Applications/CrossO
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] ver.app/Contents/SharedSupport/X
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] 11/lib/libGL.dylib
2/26/10 5:55:00 PM [0x0-0xd69d69].com.codeweavers.CrossOver[17182] dyld: warning, DYLD_ setting caused circular dependency in /Applications/CrossOver.app/Contents/SharedSupport/X11/lib/libGL.dylib

OOo...that's something else -- I'm not a Mac person, but I can see that
as perhaps being just part of initialization, and the real information
needed isn't there/hasn't been gathered...

I do take it when you say you unticked the 'hide service packs' switch,
you then manually installed what was needed?

The best way to generate a logfile of what's going on, is to read this;

http://www.codeweavers.com/support/wiki/submittechsupportlog

Upload the log to some free public repo (like rapidshare or whatever),
post the URL to that file back here so others might grab it and have
a look at things.

Cheers!

I unchecked the "hide" option but I suspect that things didn't progress to the point of offering any optional installs.

I should probably install .Net manually.

It looks like MasterCAM X4 requires .NET 3.5? If so, it won't work today as Crossover doesn't support .NET 3.5 yet.

Please Note: This Forum is for non-application specific questions relating to installation/configuration of CrossOver. All application-specific posts to this Forum will be moved to their appropriate Compatibility Center Forum.

CrossOver Forums: the place to discuss running Windows applications on Mac and Linux

CodeWeavers or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in our Privacy Policy. You accept the use of cookies or other identifiers by clicking the Acknowledge button.
Please Wait...
eyJjb3VudHJ5IjoiVVMiLCJsYW5nIjoiZW4iLCJjYXJ0IjowLCJ0enMiOi01LCJjZG4iOiJodHRwczpcL1wvbWVkaWEuY29kZXdlYXZlcnMuY29tXC9wdWJcL2Nyb3Nzb3Zlclwvd2Vic2l0ZSIsImNkbnRzIjoxNzA4NjEzODE4LCJjc3JmX3Rva2VuIjoiUVFDZVJDdzJKU0VGVDRNWCIsImdkcHIiOjB9